https://www.high-endrolex.com/10

University of Banja Luka
Faculty of Mechanical Engineering

English | Latinica | Ћирилица

13th International Conference on Accomplishments in Mechanical and Industrial Engineering

DEMI 2017
Banja Luka
26 - 27 May 2017

13th International Conference on Accomplishments in Mechanical and Industrial Engineering

Papers

Total: 102

ID	Paper name	Author(s)
4774	Data recording systems with TELOC - 1500 for upgrading safety systems on locomotive series 441-521 APA Latinović, T., Todic, M., Barz, C., Adina Lucia, P., Paul Petrica, P. (2017). Data recording systems with teloc - 1500 for upgrading safety systems on locomotive series 441-521. 13th International Conference on Accomplishments in Mechanical and Industrial Engineering, 26.-27. may. Banja Luka, Republic of Srpska, Bosnia and Herzegovina	Tihomir Latinović, Mladen Todic, Cristian Barz, Pop-Vadean Adina Lucia, Pop Paul Petrica
4776	INSITUTALIZATION OF ENERGY MANAGEMENT INFORMATION SYSTEM IN REPUBLIC OF SRPSKA APA Kardaš, D., Gvero, P., Rodić, S. (2017). Insitutalization of energy management information system in republic of srpska. 13th International Conference on Accomplishments in Mechanical and Industrial Engineering, 26.-27. may. Banja Luka, Republic of Srpska, Bosnia and Herzegovina	Danijela Kardaš, Petar Gvero, Siniša Rodić
4777	The impact of partial refurbishment on the heating energy consumption of a residential building sector APA Stefanović, A. (2017). The impact of partial refurbishment on the heating energy consumption of a residential building sector. 13th International Conference on Accomplishments in Mechanical and Industrial Engineering, 26.-27. may. Banja Luka, Republic of Srpska, Bosnia and Herzegovina	Andreja Stefanović
4779	OPTIMIZATION OF FIBER ORIENTATION ANGLE OF A HYBRID Al / COMPOSITE CARDAN SHAFT APA Djordjevic, Z., Jovanović, S., Stanojevic, M. (2017). Optimization of fiber orientation angle of a hybrid al / composite cardan shaft. 13th International Conference on Accomplishments in Mechanical and Industrial Engineering, 26.-27. may. Banja Luka, Republic of Srpska, Bosnia and Herzegovina	Zorica Djordjevic, Saša Jovanović, Milan Stanojevic
4780	REQUIRED PARAMETERS IN THE THERMAL PROCESSES CONDUCTED FOR RICE QUALITY IMPROVEMENT APA Mojsovski, F., Tashevski, D., Shesho, I. (2017). Required parameters in the thermal processes conducted for rice quality improvement. 13th International Conference on Accomplishments in Mechanical and Industrial Engineering, 26.-27. may. Banja Luka, Republic of Srpska, Bosnia and Herzegovina	Filip Mojsovski, Done Tashevski, Igor Shesho
4781	Simulation casting point in the process of plastic injection under pressure APA Ćoralić, A., MANJGO, M., Maslo, A., Rahimić, S. (2017). Simulation casting point in the process of plastic injection under pressure. 13th International Conference on Accomplishments in Mechanical and Industrial Engineering, 26.-27. may. Banja Luka, Republic of Srpska, Bosnia and Herzegovina	Amir Ćoralić, MERSIDA MANJGO, Anel Maslo, Senad Rahimić
4783	BOLOGNA PROCESS IN SERBIA - TEN YEARS AFTER APA Lazarević Petrović, S. (2017). Bologna process in serbia - ten years after. 13th International Conference on Accomplishments in Mechanical and Industrial Engineering, 26.-27. may. Banja Luka, Republic of Srpska, Bosnia and Herzegovina	Svetlana Lazarević Petrović
4785	DETERMINATION OF LOSSES RELATED TO FRICTION WITHIN THE RECIPROCATING COMPRESSORS - INFLUENCES OF TRIBOLOGICAL OPTIMIZATION OF PISTON AND CYLINDER APA Milojević, S., Pešić, R., Taranović, D. (2017). Determination of losses related to friction within the reciprocating compressors - influences of tribological optimization of piston and cylinder. 13th International Conference on Accomplishments in Mechanical and Industrial Engineering, 26.-27. may. Banja Luka, Republic of Srpska, Bosnia and Herzegovina	Saša Milojević, Radivoje Pešić, Dragan Taranović
4786	COMPUTATIONS AND EXPERIMENTAL STRENGTH OF HELICOPTER TAIL ROTOR BLADES MADE FROM COMPOSITE MATERIALS APA Maksimović, S., Vasović, I., Maksimović, M., Đurić, M. (2017). Computations and experimental strength of helicopter tail rotor blades made from composite materials. 13th International Conference on Accomplishments in Mechanical and Industrial Engineering, 26.-27. may. Banja Luka, Republic of Srpska, Bosnia and Herzegovina	Stevan Maksimović, Ivana Vasović, Mirko Maksimović, Mirjana Đurić

Copyright © 2016 l confOrganiser.com
All rights reserved. 2016 | BitLab

https://www.high-endrolex.com/10